Outdoor Bar Shed The Hangover Corner Garden Bar III W2.4m x D2.4m

Garden Sheds By Dunster House. Over 25 Years Of Supplying Quality Products.

The Hangover Corner Garden Bar III - W2.4m x D. Easy To Build Panel System.

Stylish WPC Slate Effect Roof. Please see additional information below.

Constructed using a DIY panel System for quick and easy install, the high-quality Hangover Garden Bar can be made in as little as a day and, due to the Pressure Treated timber, you can start using it as soon as it's built. Featuring a stylish slate effect WPC roof, made from highly durable and easy to maintain material, your Garden Bar is going to be a cut above the rest compared to other similar products on the market! The Hangover Garden Bar will make a fantastic addition to any garden, creating the ideal entertainment space. Whichever type of garden bar you are dreaming of - a gin joint, a sporty pub, a family snack shack, the Hangover Garden Bar covers it. Simply remove the serving hatches and let the fun begin!

The Outdoor Garden Bar is protected against rot and fungal decay for 10 years meaning you get to have all the fun without all the work. Easy to Build Panel System.

External Width/Depth: 2.40m (7' 10") / 2.40m (7' 10"). Ridge Height: 2.19m (7' 2). Internal Width/Depth: 1.64m (5' 4") / 1.64m (5' 4"). Internal Eaves Height: 1.80m (5' 10). Internal Area (m2): 2.33m.

Floor Material: 10mm MFP Board. Roof Material: 10mm Slate Effect WPC.

Shed Roof Purlins: 35mm x 70mm. Wall Thickness: 15mm Shiplap Cladding. Hatch Opening Size: 1.54m x 0.75m (5' 0" x 2' 5"). Shed Door Locking System: Security Hasp & Clasp.

Floor Bearers : Included (Pressure Treated). Timber: Pressure Treated Slow-Grown Spruce. Guarantee: 10 Years on Pressure Treated Timber against Rot and Insect Infestation. DIY Assembly Time: 1-2 Days.

Assembly Fixings & Instructions: All included. STYLISH WPC SLATE EFFECT ROOF.

Our Slate Effect Hangover Bars feature a WPC (Wood Polymer Composite) roof which is 10mm thick and engraved with a slate tile effect. WPC is a fantastic material that is water-resistant and low maintenance. You don't need to worry about fitting any roof protection as the WPC has you covered! EASY TO BUILD PANEL SYSTEM. To make life easier, the walls of this Hangover Garden Bar arrive in panels for smooth, straight-forward easy assembly.

Less time building, more time enjoying your new bar! The high internal eaves height on this Hangover Garden Bar provides plenty of room inside for people to walk around without bumping their heads and plenty of space for storage also. There's no need to duck! Shiplap cladding is named after the old boatmaking technique where the boards overlap.

This means that the natural timber can expand and contract with the seasons. The curve or channel of shiplap cladding applied with a good quality water repellent enables water to run off easily. Our Hangover Garden Bars are built to last!

This building is under 2.5m high. Well, under permitted development rights buildings under 2.5m high can be placed as close as you want to a boundary eg.

A fence line without planning permission. Buildings that are over 2.5m high, however, need to be placed over 2m away from any boundary eg. A fence line, which means that with taller buildings you end up with a lot of space behind them. Remove the two easy to remove bar hatches and create the perfect space for entertaining. The bar hatches can be easily removed from the inside using the stainless steel handles, and once the fun is over, you can secure them back in place with the strong and sturdy locking system which is included as standard.

The wide opening bar hatches provide ample room allowing you to serve with ease! CUSTOMERS WHO BOUGHT THIS ALSO BOUGHT. We do not offer installation.

All our garden buildings have been designed for the DIY market and supplied with full pictorial instructions. Despite the care we take in selecting the very best Timber available, it can still be unpredictable as its very nature is to be porous and swell up when it gets wet. Any wooden product will do this throughout its life, but there are a few things you can do to help limit this movement. We would recommend that you use an appropriate water repellent treatment. This helps minimise the amount of moisture that the timber can absorb and thus minimises the risk of any major movement. (Please note: water repellent treatment is not the same as pressure treatment). Keeping your timber building ventilated is no less important than keeping your house well ventilated. This is especially true if you plan to cover up your floorboards with something (double check with an expert, that the material is suitable to do so), as moisture can become trapped between layers of non-breathable materials and build-up, leading to floors becoming rotten. Whether you opt to build your product yourself, do not be afraid to tighten the odd bolt here and there. Your product is a long-term investment, so it is only right to give it some love and care from time to time.

Make sure that it is properly treated before the rainy months, and that you make adjustments to doors and or window frames when needed. We recommend a flat, level concrete base with an allowance of at least 100mm on each side. A 4m by 3m building would have a base of 4.2m by 3.2m. The slow-grown spruce timber used for this shed is pressure treated. This is an intensive treatment process which gives far higher-quality and longer-lasting results than dip-treatment.

Unlike others on the market, even the framework is pressure treated to ensure it lasts. All our pressure treated timber will last against fungal decay and insect infestation for approximately 10 years or longer. Our shed models come in different sizes you can choose from.

This allows us to ensure consistent quality of our products and precise cuts made by our machines. All our products are delivered using our own fleet of vehicles, not sub-contractors. E are unable to deliver to Scotland, and a number of other postcodes until further notice. We apologise for any inconvenience caused. Postcodes affected include: Many SA and PL postcodes, TR, TQ6, 7, 8 & 9.

EX20, 21, 22, 23, 38 & 39. LD2, 3, 4 & 5. Please note that goods will be delivered to the first point of contact at the front of your property e. If they feel that there is no clear access as stated above, they will have to leave the items at the kerbside. DIY Assembly Time: 1-2 Day This is an approximate time only, based on 2 people.

Assembly time may vary depending on season/weather conditions, foundation type, the DIY ability of those constructing, etc. All fixings needed for assembly are supplied. All wood is planed, pre-cut (with the exception of trims), and pre-notched for quick and easy construction.

Colour of delivered products and or accessories, may vary from the colour shown in images. Images may also show optional extras which may not be included with the listing. All of our Pressure Treated Timber holds a 10 year guarantee against damage by insects and fungal decay. The guarantee is subject to proper installation and normal residential use. It does not include non-pressure treated wooden parts, and/or any accessories. Accessories and all other parts, including nuts, bolts, screws, washers, etc. Are covered for 1 year against manufacturing faults. This guarantee covers only the replacement of goods, it does not include any travel expenses, labour costs, or anything else involved in the installation or replacement of the parts. The guarantee is voided if the product is subjected to abuse, negligence, improper use, Acts of God, modifications, attachment to equipment other than our own, or if used for non-residential use.

Timber is a natural product that may change colour over time and adapt to various weather conditions. Splits, cracks, and shakes that may appear are perfectly normal and should not affect the overall strength and durability of the timber. Wood knots and knot holes are not covered by the guarantee as these naturally occur in all wood. This item is in the category "Garden & Patio\Garden Structures & Shade\Sheds, Summerhouses & Carports".

The seller is "dunsterhouseltd" and is located in this country: GB. This item can be shipped to United Kingdom.

Item Depth: 2.40 m
Item Height: 2.19 m
Item Width: 2.40 m
Assembly Required: Yes
Item Depth (Interior): 1.64 m
Item Height (Interior): 1.80 m
Material: Wood
Item Width (Interior): 1.64 m
Type: Outdoor Bar Shed
Features: Easy Assembly, Heavy Duty, Lockable, Paintable, Pressure-Treated
MPN: 8421
Frame Material: Wood
Brand: Dunster House
Roof Material: Slate Effect WPC
EAN: 5055438719784